Skip to content

GitLab

Switch branch/tag
  1. 20 Feb, 2006 1 commit
    • Christoph Lameter's avatar
      [PATCH] Terminate process that fails on a constrained allocation · 9b0f8b04
      Christoph Lameter authored 
      
Some allocations are restricted to a limited set of nodes (due to memory
policies or cpuset constraints).  If the page allocator is not able to find
enough memory then that does not mean that overall system memory is low.

In particular going postal and more or less randomly shooting at processes
is not likely going to help the situation but may just lead to suicide (the
whole system coming down).

It is better to signal to the process that no memory exists given the
constraints that the process (or the configuration of the process) has
placed on the allocation behavior.  The process may be killed but then the
sysadmin or developer can investigate the situation.  The solution is
similar to what we do when running out of hugepages.

This patch adds a check before we kill processes.  At that point
performance considerations do not matter much so we just scan the zonelist
and reconstruct a list of nodes.  If the list of nodes does not contain all
online nodes then this is a constrained allocation and we should kill the
current process.
Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      9b0f8b04
  3. 17 Feb, 2006 1 commit
  5. 14 Feb, 2006 2 commits
    • Hugh Dickins's avatar
      [PATCH] compound page: default destructor · d98c7a09
      Hugh Dickins authored 
      
Somehow I imagined that calling a NULL destructor would free a compound page
rather than oopsing.  No, we must supply a default destructor, __free_pages_ok
using the order noted by prep_compound_page.  hugetlb can still replace this
as before with its own free_huge_page pointer.

The case that needs this is not common: rarely does put_compound_page's
put_page_testzero bring the count down to 0.  But if get_user_pages is applied
to some part of a compound page, without immediate release (e.g.  AIO or
Infiniband), then it's possible for its put_page to come after the containing
vma has been unmapped and the driver done its free_pages.

That's just the kind of case compound pages are supposed to be guarding
against (but Nick points out, nor did PageReserved handle this right).
Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      d98c7a09
    • Hugh Dickins's avatar
      [PATCH] compound page: use page[1].lru · 41d78ba5
      Hugh Dickins authored 
      
If a compound page has its own put_page_testzero destructor (the only current
example is free_huge_page), that is noted in page[1].mapping of the compound
page.  But that's rather a poor place to keep it: functions which call
set_page_dirty_lock after get_user_pages (e.g.  Infiniband's
__ib_umem_release) ought to be checking first, otherwise set_page_dirty is
liable to crash on what's not the address of a struct address_space.

And now I'm about to make that worse: it turns out that every compound page
needs a destructor, so we can no longer rely on hugetlb pages going their own
special way, to avoid further problems of page->mapping reuse.  For example,
not many people know that: on 50% of i386 -Os builds, the first tail page of a
compound page purports to be PageAnon (when its destructor has an odd
address), which surprises page_add_file_rmap.

Keep the compound page destructor in page[1].lru.next instead.  And to free up
the common pairing of mapping and index, also move compound page order from
index to lru.prev.  Slab reuses page->lru too: but if we ever need slab to use
compound pages, it can easily stack its use above this.

(akpm: decoded version of the above: the tail pages of a compound page now
have ->mapping==NULL, so there's no need for the set_page_dirty[_lock]()
caller to check that they're not compund pages before doing the dirty).
Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      41d78ba5
  7. 05 Feb, 2006 1 commit
  9. 01 Feb, 2006 1 commit
  11. 18 Jan, 2006 1 commit
  13. 17 Jan, 2006 1 commit
  15. 12 Jan, 2006 1 commit
  17. 11 Jan, 2006 3 commits
  19. 09 Jan, 2006 1 commit
  21. 08 Jan, 2006 6 commits
    • Paul Jackson's avatar
      [PATCH] cpuset: memory pressure meter · 3e0d98b9
      Paul Jackson authored 
      
Provide a simple per-cpuset metric of memory pressure, tracking the -rate-
that the tasks in a cpuset call try_to_free_pages(), the synchronous
(direct) memory reclaim code.

This enables batch managers monitoring jobs running in dedicated cpusets to
efficiently detect what level of memory pressure that job is causing.

This is useful both on tightly managed systems running a wide mix of
submitted jobs, which may choose to terminate or reprioritize jobs that are
trying to use more memory than allowed on the nodes assigned them, and with
tightly coupled, long running, massively parallel scientific computing jobs
that will dramatically fail to meet required performance goals if they
start to use more memory than allowed to them.

This patch just provides a very economical way for the batch manager to
monitor a cpuset for signs of memory pressure.  It's up to the batch
manager or other user code to decide what to do about it and take action.

==> Unless this feature is enabled by writing "1" to the special file
    /dev/cpuset/memory_pressure_enabled, the hook in the rebalance
    code of __alloc_pages() for this metric reduces to simply noticing
    that the cpuset_memory_pressure_enabled flag is zero.  So only
    systems that enable this feature will compute the metric.

Why a per-cpuset, running average:

    Because this meter is per-cpuset, rather than per-task or mm, the
    system load imposed by a batch scheduler monitoring this metric is
    sharply reduced on large systems, because a scan of the tasklist can be
    avoided on each set of queries.

    Because this meter is a running average, instead of an accumulating
    counter, a batch scheduler can detect memory pressure with a single
    read, instead of having to read and accumulate results for a period of
    time.

    Because this meter is per-cpuset rather than per-task or mm, the
    batch scheduler can obtain the key information, memory pressure in a
    cpuset, with a single read, rather than having to query and accumulate
    results over all the (dynamically changing) set of tasks in the cpuset.

A per-cpuset simple digital filter (requires a spinlock and 3 words of data
per-cpuset) is kept, and updated by any task attached to that cpuset, if it
enters the synchronous (direct) page reclaim code.

A per-cpuset file provides an integer number representing the recent
(half-life of 10 seconds) rate of direct page reclaims caused by the tasks
in the cpuset, in units of reclaims attempted per second, times 1000.
Signed-off-by: default avatarPaul Jackson <pj@sgi.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      3e0d98b9
    • Nick Piggin's avatar
      [PATCH] mm: free_pages opt · 48db57f8
      Nick Piggin authored 
      
Try to streamline free_pages_bulk by ensuring callers don't pass in a
'count' that exceeds the list size.

Some cleanups:
Rename __free_pages_bulk to __free_one_page.
Put the page list manipulation from __free_pages_ok into free_one_page.
Make __free_pages_ok static.
Signed-off-by: default avatarNick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      48db57f8
    • Nick Piggin's avatar
      [PATCH] mm: cleanup zone_pcp · 23316bc8
      Nick Piggin authored 
      
Use zone_pcp everywhere even though NUMA code "knows" the internal details
of the zone.  Stop other people trying to copy, and it looks nicer.

Also, only print the pagesets of online cpus in zoneinfo.
Signed-off-by: default avatarNick Piggin <npiggin@suse.de>
Cc: "Seth, Rohit" <rohit.seth@intel.com>
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      23316bc8
    • Rohit Seth's avatar
      [PATCH] Make high and batch sizes of per_cpu_pagelists configurable · 8ad4b1fb
      Rohit Seth authored 
      
As recently there has been lot of traffic on the right values for batch and
high water marks for per_cpu_pagelists.  This patch makes these two
variables configurable through /proc interface.

A new tunable /proc/sys/vm/percpu_pagelist_fraction is added.  This entry
controls the fraction of pages at most in each zone that are allocated for
each per cpu page list.  The min value for this is 8.  It means that we
don't allow more than 1/8th of pages in each zone to be allocated in any
single per_cpu_pagelist.

The batch value of each per cpu pagelist is also updated as a result.  It
is set to pcp->high/4.  The upper limit of batch is (PAGE_SHIFT * 8)
Signed-off-by: default avatarRohit Seth <rohit.seth@intel.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      8ad4b1fb
    • Christoph Lameter's avatar
      [PATCH] slab: remove nested #ifdef CONFIG_NUMA · bec6b0c8
      Christoph Lameter authored 
      
For some reason there is an #ifdef CONFIG_NUMA within another #ifdef
CONFIG_NUMA in the page allocator.  Remove innermost #ifdef CONFIG_NUMA
Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      bec6b0c8
    • Andrew Morton's avatar
      [PATCH] revert "mm: page_state fixes" · 84c2008a
      Andrew Morton authored 
      
Hugh says:

page_alloc_cpu_notify() specifically contains code to

 		/* Add dead cpu's page_states to our own. */

which handles this more efficiently.

Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      84c2008a
  23. 06 Jan, 2006 18 commits
  25. 15 Dec, 2005 1 commit
  27. 03 Dec, 2005 1 commit
  29. 28 Nov, 2005 1 commit