GitLab

There is a bug in LPG module that results in incorrect
behavior of pattern when LUT index 0 is used. So effectively
there are 63 usable LUT entries. Do not use the existing 0th
LUT entry.

Change-Id: Icf3f7534e1138661a0248ce3c57b4d30aa9240f2
Signed-off-by: Jay Chokshi <jchokshi@codeaurora.org>

Supply platform data for speaker driver with info of additional
speaker inputs supported. The pmic pm8038 supports one additional
input path to Speaker Power amps. Add this to pdata as part
of PMIC sub devices platform data.

Change-Id: I8045cc517a29853590b436f86cac5504557de049
Signed-off-by: Asish Bhattacharya <asishb@codeaurora.org>

The WLED trigger to control the backlight will be triggered
by the display driver.

Change-Id: Ib3daa8caabf9884acdef7d7f71ad008079cf07c4
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>

Control RGB leds through sysfs entries.  Add necessary
drive lines, names, current and PWM cycles.

Change-Id: I6b6174e276c2998e25619eb3e65bfe468820b84c
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>

Enable haptics on 8930 CDP Phase 2.  Remove haptics
support for Phase 1 CDPs as all have been upgraded
to Phase 2.  Configure necessary clock and gpio pins.
Enable regulator to pull up i2c line for communication.

Change-Id: Ifcd1f9332cce382aa99b520ca85fe4ccf08ad2f2
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>

The SMBC HW automatically turns on the charger LED during HW-controlled
Auto Trickle Charging (ATC). After system boots up, charger SW needs
to manually turn on the charger LED since the anode is connected to GND
by default. Add configuration to connect the LED anode power source
to VPH_PWR by default.

Change-Id: I3984d747e725c0cb067ae7bda84626b132b2ffcb
Signed-off-by: Jay Chokshi <jchokshi@codeaurora.org>

Increase the pull up strength (current source pulls) from
1.5uA to 30uA for devices (MTP and XPM) which do not have
external pull-ups.

Change-Id: I8c95fb7127c04f4029bc85270a3b31935ad8a588
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>

To ensure proper battery id dectection on LiQUID and MTP
use machine_is_msm8960/8064_mtp/cdp to determine which
calibration data to use for battery. If platform is
unknown fall back on regular battery id detection.

Change-Id: I2f5629572d1e5fcac0a2feb114947b91a96f3bf0
Signed-off-by: David Keitel <dkeitel@codeaurora.org>

Supply platform data for White LED(WLED) with number of led
strings supported, default status, max current and others.
Add this pdata as part of PMIC sub devices platform data.

Change-Id: Ib621bb52fb9396a7437823b48fc099de5914130b
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>

Enable charger for PM8038 platform and its dependent devices.
This is required to enable charging on devices using PM8038.

Also change gpio mux configuration to make sure that VBUS
is not pulled high when gpio_request is made.

Change-Id: Id64bc3846090bcaedf00f5f9177930618fa61605
Signed-off-by: David Keitel <dkeitel@codeaurora.org>

Support volume up/down and camera focus/snapshot

Change-Id: Ic4e14519cd4d7d64f4c355c8a9f3791355b14788
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>

Change-Id: I40e13cb73522bb0951675db0a3afa2910c21db12
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>

Add supported ADC channels and its configuration for
PM8038. Configuration includes the sampling rate,
channel properties and the scaling functions for the
respective channels.

Change-Id: I4973b80b7d72fd2776b360a8279d652b268e4125
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>

Add an MSM8930 regulator board file to support the PMIC PM8038
regulators.  Also add support for the 5V boost regulator and the
USB OTG voltage switch.

Change-Id: I6cc3254230f7dd00604c1c0aaf9e56299d7673b6
Signed-off-by: David Collins <collinsd@codeaurora.org>

Add platform data for PM8038 pmic. Also add a conditional
compilation macro to, by default, compile the 8930 board
files to work with e-fused 8960 board with physical PM8921
pmic on it. Once physical PM8038 becomes available, add
appropriate replacements.

Change-Id: I46e5fd8ed2c921d5293080663ef69092b7967d8b
Signed-off-by: Jay Chokshi <jchokshi@codeaurora.org>

Since the same ssbi-pmic is being used for both
MSM8960 and MSM8930, rename the object so
that it does not tie up with any particular pmic.
Both above mentioned MSMs use different PMIC.

Change-Id: I4894912c9650736c9479d70237783657a43d7a8c
Signed-off-by: Jay Chokshi <jchokshi@codeaurora.org>

Remove the MSM / APQ prefixes from 8930, 8960, and 8064
board files.

Change-Id: I8368be0b80385a40616fa2fcd2f108df66faf6ee
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>

Create dedicated board files for MSM8930 targets, and move
the MSM8930 machine records and init code there. These
files are largely based on the MSM8960 board files.

Change-Id: I7de17856cb9950e98c349d38ddd87ba6109b6d23
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>

Move the MSM8960 PMIC devices, associated devices, and
initialization code into a dedicated board file.

Change-Id: I74f29ae6f4eaed0a83b3622276f79477120748b4
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>