Merge branch 'linus' into cpus4096

Conflicts:

	kernel/stop_machine.c
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Documentation/SubmittingPatches

@@ -528,7 +528,33 @@ See more details on the proper patch format in the following
 references.
 
 
+16) Sending "git pull" requests  (from Linus emails)
 
+Please write the git repo address and branch name alone on the same line
+so that I can't even by mistake pull from the wrong branch, and so
+that a triple-click just selects the whole thing.
+
+So the proper format is something along the lines of:
+
+	"Please pull from
+
+		git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus
+
+	 to get these changes:"
+
+so that I don't have to hunt-and-peck for the address and inevitably
+get it wrong (actually, I've only gotten it wrong a few times, and
+checking against the diffstat tells me when I get it wrong, but I'm
+just a lot more comfortable when I don't have to "look for" the right
+thing to pull, and double-check that I have the right branch-name).
+
+
+Please use "git diff -M --stat --summary" to generate the diffstat:
+the -M enables rename detection, and the summary enables a summary of
+new/deleted or renamed files.
+
+With rename detection, the statistics are rather different [...]
+because git will notice that a fair number of the changes are renames.
 
 -----------------------------------
 SECTION 2 - HINTS, TIPS, AND TRICKS

Documentation/feature-removal-schedule.txt

@@ -47,6 +47,30 @@ Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
 
 ---------------------------
 
+What:	old tuner-3036 i2c driver
+When:	2.6.28
+Why:	This driver is for VERY old i2c-over-parallel port teletext receiver
+	boxes. Rather then spending effort on converting this driver to V4L2,
+	and since it is extremely unlikely that anyone still uses one of these
+	devices, it was decided to drop it.
+Who:	Hans Verkuil <hverkuil@xs4all.nl>
+	Mauro Carvalho Chehab <mchehab@infradead.org>
+
+ ---------------------------
+
+What:   V4L2 dpc7146 driver
+When:   2.6.28
+Why:    Old driver for the dpc7146 demonstration board that is no longer
+	relevant. The last time this was tested on actual hardware was
+	probably around 2002. Since this is a driver for a demonstration
+	board the decision was made to remove it rather than spending a
+	lot of effort continually updating this driver to stay in sync
+	with the latest internal V4L2 or I2C API.
+Who:    Hans Verkuil <hverkuil@xs4all.nl>
+	Mauro Carvalho Chehab <mchehab@infradead.org>
+
+---------------------------
+
 What:	PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
 When:	November 2005
 Files:	drivers/pcmcia/: pcmcia_ioctl.c

Documentation/i2c/upgrading-clients

+Upgrading I2C Drivers to the new 2.6 Driver Model
+=================================================
+
+Ben Dooks <ben-linux@fluff.org>
+
+Introduction
+------------
+
+This guide outlines how to alter existing Linux 2.6 client drivers from
+the old to the new new binding methods.
+
+
+Example old-style driver
+------------------------
+
+
+struct example_state {
+	struct i2c_client	client;
+	....
+};
+
+static struct i2c_driver example_driver;
+
+static unsigned short ignore[] = { I2C_CLIENT_END };
+static unsigned short normal_addr[] = { OUR_ADDR, I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD;
+
+static int example_attach(struct i2c_adapter *adap, int addr, int kind)
+{
+	struct example_state *state;
+	struct device *dev = &adap->dev;  /* to use for dev_ reports */
+	int ret;
+
+	state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
+	if (state == NULL) {
+		dev_err(dev, "failed to create our state\n");
+		return -ENOMEM;
+	}
+
+	example->client.addr    = addr;
+	example->client.flags   = 0;
+	example->client.adapter = adap;
+
+	i2c_set_clientdata(&state->i2c_client, state);
+	strlcpy(client->i2c_client.name, "example", I2C_NAME_SIZE);
+
+	ret = i2c_attach_client(&state->i2c_client);
+	if (ret < 0) {
+		dev_err(dev, "failed to attach client\n");
+		kfree(state);
+		return ret;
+	}
+
+	dev = &state->i2c_client.dev;
+
+	/* rest of the initialisation goes here. */
+
+	dev_info(dev, "example client created\n");
+
+	return 0;
+}
+
+static int __devexit example_detach(struct i2c_client *client)
+{
+	struct example_state *state = i2c_get_clientdata(client);
+
+	i2c_detach_client(client);
+	kfree(state);
+	return 0;
+}
+
+static int example_attach_adapter(struct i2c_adapter *adap)
+{
+	return i2c_probe(adap, &addr_data, example_attach);
+}
+
+static struct i2c_driver example_driver = {
+ 	.driver		= {
+		.owner		= THIS_MODULE,
+		.name		= "example",
+	},
+	.attach_adapter = example_attach_adapter,
+	.detach_client	= __devexit_p(example_detach),
+	.suspend	= example_suspend,
+	.resume		= example_resume,
+};
+
+
+Updating the client
+-------------------
+
+The new style binding model will check against a list of supported
+devices and their associated address supplied by the code registering
+the busses. This means that the driver .attach_adapter and
+.detach_adapter methods can be removed, along with the addr_data,
+as follows:
+
+- static struct i2c_driver example_driver;
+
+- static unsigned short ignore[] = { I2C_CLIENT_END };
+- static unsigned short normal_addr[] = { OUR_ADDR, I2C_CLIENT_END };
+
+- I2C_CLIENT_INSMOD;
+
+- static int example_attach_adapter(struct i2c_adapter *adap)
+- {
+- 	return i2c_probe(adap, &addr_data, example_attach);
+- }
+
+ static struct i2c_driver example_driver = {
+-	.attach_adapter = example_attach_adapter,
+-	.detach_client	= __devexit_p(example_detach),
+ }
+
+Add the probe and remove methods to the i2c_driver, as so:
+
+ static struct i2c_driver example_driver = {
++	.probe		= example_probe,
++	.remove		= __devexit_p(example_remove),
+ }
+
+Change the example_attach method to accept the new parameters
+which include the i2c_client that it will be working with:
+
+- static int example_attach(struct i2c_adapter *adap, int addr, int kind)
++ static int example_probe(struct i2c_client *client,
++			   const struct i2c_device_id *id)
+
+Change the name of example_attach to example_probe to align it with the
+i2c_driver entry names. The rest of the probe routine will now need to be
+changed as the i2c_client has already been setup for use.
+
+The necessary client fields have already been setup before
+the probe function is called, so the following client setup
+can be removed:
+
+-	example->client.addr    = addr;
+-	example->client.flags   = 0;
+-	example->client.adapter = adap;
+-
+-	strlcpy(client->i2c_client.name, "example", I2C_NAME_SIZE);
+
+The i2c_set_clientdata is now:
+
+-	i2c_set_clientdata(&state->client, state);
++	i2c_set_clientdata(client, state);
+
+The call to i2c_attach_client is no longer needed, if the probe
+routine exits successfully, then the driver will be automatically
+attached by the core. Change the probe routine as so:
+
+-	ret = i2c_attach_client(&state->i2c_client);
+-	if (ret < 0) {
+-		dev_err(dev, "failed to attach client\n");
+-		kfree(state);
+-		return ret;
+-	}
+
+
+Remove the storage of 'struct i2c_client' from the 'struct example_state'
+as we are provided with the i2c_client in our example_probe. Instead we
+store a pointer to it for when it is needed.
+
+struct example_state {
+-	struct i2c_client	client;
++	struct i2c_client	*client;
+
+the new i2c client as so:
+
+-	struct device *dev = &adap->dev;  /* to use for dev_ reports */
++ 	struct device *dev = &i2c_client->dev;  /* to use for dev_ reports */
+
+And remove the change after our client is attached, as the driver no
+longer needs to register a new client structure with the core:
+
+-	dev = &state->i2c_client.dev;
+
+In the probe routine, ensure that the new state has the client stored
+in it:
+
+static int example_probe(struct i2c_client *i2c_client,
+			 const struct i2c_device_id *id)
+{
+	struct example_state *state;
+ 	struct device *dev = &i2c_client->dev;
+	int ret;
+
+	state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
+	if (state == NULL) {
+		dev_err(dev, "failed to create our state\n");
+		return -ENOMEM;
+	}
+
++	state->client = i2c_client;
+
+Update the detach method, by changing the name to _remove and
+to delete the i2c_detach_client call. It is possible that you
+can also remove the ret variable as it is not not needed for
+any of the core functions.
+
+- static int __devexit example_detach(struct i2c_client *client)
++ static int __devexit example_remove(struct i2c_client *client)
+{
+	struct example_state *state = i2c_get_clientdata(client);
+
+-	i2c_detach_client(client);
+
+And finally ensure that we have the correct ID table for the i2c-core
+and other utilities:
+
++ struct i2c_device_id example_idtable[] = {
++       { "example", 0 },
++       { }
++};
++
++MODULE_DEVICE_TABLE(i2c, example_idtable);
+
+static struct i2c_driver example_driver = {
+ 	.driver		= {
+		.owner		= THIS_MODULE,
+		.name		= "example",
+	},
++	.id_table	= example_ids,
+
+
+Our driver should now look like this:
+
+struct example_state {
+	struct i2c_client	*client;
+	....
+};
+
+static int example_probe(struct i2c_client *client,
+		     	 const struct i2c_device_id *id)
+{
+	struct example_state *state;
+	struct device *dev = &client->dev;
+
+	state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
+	if (state == NULL) {
+		dev_err(dev, "failed to create our state\n");
+		return -ENOMEM;
+	}
+
+	state->client = client;
+	i2c_set_clientdata(client, state);
+
+	/* rest of the initialisation goes here. */
+
+	dev_info(dev, "example client created\n");
+
+	return 0;
+}
+
+static int __devexit example_remove(struct i2c_client *client)
+{
+	struct example_state *state = i2c_get_clientdata(client);
+
+	kfree(state);
+	return 0;
+}
+
+static struct i2c_device_id example_idtable[] = {
+	{ "example", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, example_idtable);
+
+static struct i2c_driver example_driver = {
+ 	.driver		= {
+		.owner		= THIS_MODULE,
+		.name		= "example",
+	},
+	.id_table	= example_idtable,
+	.probe		= example_probe,
+	.remove		= __devexit_p(example_remove),
+	.suspend	= example_suspend,
+	.resume		= example_resume,
+};

Documentation/video4linux/CARDLIST.au0828

@@ -2,3 +2,4 @@
   1 -> Hauppauge HVR950Q                        (au0828)        [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008]
   2 -> Hauppauge HVR850                         (au0828)        [2040:7240]
   3 -> DViCO FusionHDTV USB                     (au0828)        [0fe9:d620]
+  4 -> Hauppauge HVR950Q rev xxF8               (au0828)        [2040:7201,2040:7211,2040:7281]

Documentation/video4linux/CARDLIST.em28xx

   0 -> Unknown EM2800 video grabber             (em2800)        [eb1a:2800]
-  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2750,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
+  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
   2 -> Terratec Cinergy 250 USB                 (em2820/em2840) [0ccd:0036]
   3 -> Pinnacle PCTV USB 2                      (em2820/em2840) [2304:0208]
   4 -> Hauppauge WinTV USB 2                    (em2820/em2840) [2040:4200,2040:4201]
   5 -> MSI VOX USB 2.0                          (em2820/em2840)
   6 -> Terratec Cinergy 200 USB                 (em2800)
-  7 -> Leadtek Winfast USB II                   (em2800)
+  7 -> Leadtek Winfast USB II                   (em2800)        [0413:6023]
   8 -> Kworld USB2800                           (em2800)
   9 -> Pinnacle Dazzle DVC 90/DVC 100           (em2820/em2840) [2304:0207,2304:021a]
  10 -> Hauppauge WinTV HVR 900                  (em2880)        [2040:6500]
@@ -14,7 +14,46 @@
  13 -> Terratec Prodigy XS                      (em2880)        [0ccd:0047]
  14 -> Pixelview Prolink PlayTV USB 2.0         (em2820/em2840)
  15 -> V-Gear PocketTV                          (em2800)
- 16 -> Hauppauge WinTV HVR 950                  (em2880)        [2040:6513,2040:6517,2040:651b,2040:651f]
+ 16 -> Hauppauge WinTV HVR 950                  (em2883)        [2040:6513,2040:6517,2040:651b,2040:651f]
  17 -> Pinnacle PCTV HD Pro Stick               (em2880)        [2304:0227]
  18 -> Hauppauge WinTV HVR 900 (R2)             (em2880)        [2040:6502]
  19 -> PointNix Intra-Oral Camera               (em2860)
+ 20 -> AMD ATI TV Wonder HD 600                 (em2880)        [0438:b002]
+ 21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800)        [eb1a:2801]
+ 22 -> Unknown EM2750/EM2751 webcam grabber     (em2750)        [eb1a:2750,eb1a:2751]
+ 23 -> Huaqi DLCW-130                           (em2750)
+ 24 -> D-Link DUB-T210 TV Tuner                 (em2820/em2840) [2001:f112]
+ 25 -> Gadmei UTV310                            (em2820/em2840)
+ 26 -> Hercules Smart TV USB 2.0                (em2820/em2840)
+ 27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)   (em2820/em2840)
+ 28 -> Leadtek Winfast USB II Deluxe            (em2820/em2840)
+ 29 -> Pinnacle Dazzle DVC 100                  (em2820/em2840)
+ 30 -> Videology 20K14XUSB USB2.0               (em2820/em2840)
+ 31 -> Usbgear VD204v9                          (em2821)
+ 32 -> Supercomp USB 2.0 TV                     (em2821)
+ 33 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0  (em2821)
+ 34 -> Terratec Cinergy A Hybrid XS             (em2860)        [0ccd:004f]
+ 35 -> Typhoon DVD Maker                        (em2860)
+ 36 -> NetGMBH Cam                              (em2860)
+ 37 -> Gadmei UTV330                            (em2860)
+ 38 -> Yakumo MovieMixer                        (em2861)
+ 39 -> KWorld PVRTV 300U                        (em2861)        [eb1a:e300]
+ 40 -> Plextor ConvertX PX-TV100U               (em2861)        [093b:a005]
+ 41 -> Kworld 350 U DVB-T                       (em2870)        [eb1a:e350]
+ 42 -> Kworld 355 U DVB-T                       (em2870)        [eb1a:e355,eb1a:e357]
+ 43 -> Terratec Cinergy T XS                    (em2870)        [0ccd:0043]
+ 44 -> Terratec Cinergy T XS (MT2060)           (em2870)
+ 45 -> Pinnacle PCTV DVB-T                      (em2870)
+ 46 -> Compro, VideoMate U3                     (em2870)        [185b:2870]
+ 47 -> KWorld DVB-T 305U                        (em2880)        [eb1a:e305]
+ 48 -> KWorld DVB-T 310U                        (em2880)
+ 49 -> MSI DigiVox A/D                          (em2880)        [eb1a:e310]
+ 50 -> MSI DigiVox A/D II                       (em2880)        [eb1a:e320]
+ 51 -> Terratec Hybrid XS Secam                 (em2880)        [0ccd:004c]
+ 52 -> DNT DA2 Hybrid                           (em2881)
+ 53 -> Pinnacle Hybrid Pro                      (em2881)
+ 54 -> Kworld VS-DVB-T 323UR                    (em2882)        [eb1a:e323]
+ 55 -> Terratec Hybrid XS (em2882)              (em2882)        [0ccd:005e]
+ 56 -> Pinnacle Hybrid Pro (2)                  (em2882)        [2304:0226]
+ 57 -> Kworld PlusTV HD Hybrid 330              (em2883)        [eb1a:a316]
+ 58 -> Compro VideoMate ForYou/Stereo           (em2820/em2840) [185b:2041]

Documentation/video4linux/gspca.txt

-List of the webcams know by gspca.
+List of the webcams known by gspca.
 
 The modules are:
 	gspca_main	main driver

MAINTAINERS

@@ -3796,6 +3796,12 @@ P:	Ben Nizette
 M:	bn@niasdigital.com
 S:	Maintained
 
+SOC-CAMERA V4L2 SUBSYSTEM
+P:     Guennadi Liakhovetski
+M:     g.liakhovetski@gmx.de
+L:     video4linux-list@redhat.com
+S:     Maintained
+
 SOFTWARE RAID (Multiple Disks) SUPPORT
 P:	Ingo Molnar
 M:	mingo@redhat.com

Makefile

@@ -206,7 +206,11 @@ ifeq ($(ARCH),x86_64)
 endif
 
 # Where to locate arch specific headers
-hdr-arch       := $(SRCARCH)
+ifeq ($(ARCH),sparc64)
+       hdr-arch  := sparc
+else
+       hdr-arch  := $(SRCARCH)
+endif
 
 KCONFIG_CONFIG	?= .config
 

arch/powerpc/Kconfig

@@ -117,6 +117,7 @@ config PPC
 	select HAVE_KPROBES
 	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
+	select HAVE_ARCH_TRACEHOOK
 	select HAVE_LMB
 	select HAVE_DMA_ATTRS if PPC64
 	select USE_GENERIC_SMP_HELPERS if SMP

arch/powerpc/kernel/entry_32.S

@@ -148,7 +148,7 @@ transfer_to_handler:
 	/* Check to see if the dbcr0 register is set up to debug.  Use the
 	   internal debug mode bit to do this. */
 	lwz	r12,THREAD_DBCR0(r12)
-	andis.	r12,r12,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
+	andis.	r12,r12,DBCR0_IDM@h
 	beq+	3f
 	/* From user and task is ptraced - load up global dbcr0 */
 	li	r12,-1			/* clear all pending debug events */
@@ -292,7 +292,7 @@ syscall_exit_cont:
 	/* If the process has its own DBCR0 value, load it up.  The internal
 	   debug mode bit tells us that dbcr0 should be loaded. */
 	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
+	andis.	r10,r0,DBCR0_IDM@h
 	bnel-	load_dbcr0
 #endif
 #ifdef CONFIG_44x
@@ -343,7 +343,12 @@ syscall_dotrace:
 	stw	r0,_TRAP(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_syscall_trace_enter
-	lwz	r0,GPR0(r1)	/* Restore original registers */
+	/*
+	 * Restore argument registers possibly just changed.
+	 * We use the return value of do_syscall_trace_enter
+	 * for call number to look up in the table (r0).
+	 */
+	mr	r0,r3
 	lwz	r3,GPR3(r1)
 	lwz	r4,GPR4(r1)
 	lwz	r5,GPR5(r1)
@@ -720,7 +725,7 @@ restore_user:
 	/* Check whether this process has its own DBCR0 value.  The internal
 	   debug mode bit tells us that dbcr0 should be loaded. */
 	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
+	andis.	r10,r0,DBCR0_IDM@h
 	bnel-	load_dbcr0
 #endif
 
@@ -1055,8 +1060,8 @@ do_user_signal:			/* r10 contains MSR_KERNEL here */
 	SAVE_NVGPRS(r1)
 	rlwinm	r3,r3,0,0,30
 	stw	r3,_TRAP(r1)
-2:	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
+2:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mr	r4,r9
 	bl	do_signal
 	REST_NVGPRS(r1)
 	b	recheck

arch/powerpc/kernel/entry_64.S

@@ -214,7 +214,12 @@ syscall_dotrace:
 	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_syscall_trace_enter
-	ld	r0,GPR0(r1)	/* Restore original registers */
+	/*
+	 * Restore argument registers possibly just changed.
+	 * We use the return value of do_syscall_trace_enter
+	 * for the call number to look up in the table (r0).
+	 */
+	mr	r0,r3
 	ld	r3,GPR3(r1)
 	ld	r4,GPR4(r1)
 	ld	r5,GPR5(r1)
@@ -638,8 +643,7 @@ user_work:
 	b	.ret_from_except_lite
 
 1:	bl	.save_nvgprs
-	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
+	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_signal
 	b	.ret_from_except
 

arch/powerpc/kernel/legacy_serial.c

@@ -493,18 +493,18 @@ static int __init serial_dev_init(void)
 device_initcall(serial_dev_init);
 
 
+#ifdef CONFIG_SERIAL_8250_CONSOLE
 /*
  * This is called very early, as part of console_init() (typically just after
  * time_init()). This function is respondible for trying to find a good
  * default console on serial ports. It tries to match the open firmware
- * default output with one of the available serial console drivers, either
- * one of the platform serial ports that have been probed earlier by
- * find_legacy_serial_ports() or some more platform specific ones.
+ * default output with one of the available serial console drivers that have
+ * been probed earlier by find_legacy_serial_ports()
  */
 static int __init check_legacy_serial_console(void)
 {
 	struct device_node *prom_stdout = NULL;
-	int speed = 0, offset = 0;
+	int i, speed = 0, offset = 0;
 	const char *name;
 	const u32 *spd;
 
@@ -548,31 +548,20 @@ static int __init check_legacy_serial_console(void)
 	if (spd)
 		speed = *spd;
 
-	if (0)
-		;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	else if (strcmp(name, "serial") == 0) {
-		int i;
-		/* Look for it in probed array */
-		for (i = 0; i < legacy_serial_count; i++) {
-			if (prom_stdout != legacy_serial_infos[i].np)
-				continue;
-			offset = i;
-			speed = legacy_serial_infos[i].speed;
-			break;
-		}
-		if (i >= legacy_serial_count)
-			goto not_found;
+	if (strcmp(name, "serial") != 0)
+		goto not_found;
+
+	/* Look for it in probed array */
+	for (i = 0; i < legacy_serial_count; i++) {
+		if (prom_stdout != legacy_serial_infos[i].np)
+			continue;
+		offset = i;
+		speed = legacy_serial_infos[i].speed;
+		break;
 	}
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
-	else if (strcmp(name, "ch-a") == 0)
-		offset = 0;
-	else if (strcmp(name, "ch-b") == 0)
-		offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
-	else
+	if (i >= legacy_serial_count)
 		goto not_found;
+
 	of_node_put(prom_stdout);
 
 	DBG("Found serial console at ttyS%d\n", offset);
@@ -591,3 +580,4 @@ static int __init check_legacy_serial_console(void)
 }
 console_initcall(check_legacy_serial_console);
 
+#endif /* CONFIG_SERIAL_8250_CONSOLE */

arch/powerpc/kernel/process.c

@@ -254,7 +254,7 @@ void do_dabr(struct pt_regs *regs, unsigned long address,
 		return;
 
 	/* Clear the DAC and struct entries.  One shot trigger */
-#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE))
+#if defined(CONFIG_BOOKE)
 	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
 							| DBCR0_IDM));
 #endif
@@ -286,7 +286,7 @@ int set_dabr(unsigned long dabr)
 	mtspr(SPRN_DABR, dabr);
 #endif
 
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 	mtspr(SPRN_DAC1, dabr);
 #endif
 
@@ -373,7 +373,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
 
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 	/* If new thread DAC (HW breakpoint) is the same then leave it */
 	if (new->thread.dabr)
 		set_dabr(new->thread.dabr);
@@ -568,7 +568,7 @@ void flush_thread(void)
 		current->thread.dabr = 0;
 		set_dabr(0);
 
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 		current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
 #endif
 	}

arch/powerpc/kernel/prom_init.c

@@ -205,8 +205,6 @@ static int __initdata mem_reserve_cnt;
 static cell_t __initdata regbuf[1024];
 
 
-#define MAX_CPU_THREADS 2
-
 /*
  * Error results ... some OF calls will return "-1" on error, some
  * will return 0, some will return either. To simplify, here are
@@ -1339,10 +1337,6 @@ static void __init prom_hold_cpus(void)
 	unsigned int reg;
 	phandle node;
 	char type[64];
-	int cpuid = 0;
-	unsigned int interrupt_server[MAX_CPU_THREADS];
-	unsigned int cpu_threads, hw_cpu_num;
-	int propsize;
 	struct prom_t *_prom = &RELOC(prom);
 	unsigned long *spinloop
 		= (void *) LOW_ADDR(__secondary_hold_spinloop);
@@ -1386,7 +1380,6 @@ static void __init prom_hold_cpus(void)
 		reg = -1;
 		prom_getprop(node, "reg", &reg, sizeof(reg));
 
-		prom_debug("\ncpuid        = 0x%x\n", cpuid);
 		prom_debug("cpu hw idx   = 0x%x\n", reg);
 
 		/* Init the acknowledge var which will be reset by
@@ -1395,28 +1388,9 @@ static void __init prom_hold_cpus(void)
 		 */
 		*acknowledge = (unsigned long)-1;
 
-		propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s",
-					&interrupt_server,
-					sizeof(interrupt_server));
-		if (propsize < 0) {
-			/* no property.  old hardware has no SMT */
-			cpu_threads = 1;
-			interrupt_server[0] = reg; /* fake it with phys id */
-		} else {
-			/* We have a threaded processor */
-			cpu_threads = propsize / sizeof(u32);
-			if (cpu_threads > MAX_CPU_THREADS) {
-				prom_printf("SMT: too many threads!\n"
-					    "SMT: found %x, max is %x\n",
-					    cpu_threads, MAX_CPU_THREADS);
-				cpu_threads = 1; /* ToDo: panic? */
-			}
-		}
-
-		hw_cpu_num = interrupt_server[0];
-		if (hw_cpu_num != _prom->cpu) {
+		if (reg != _prom->cpu) {
 			/* Primary Thread of non-boot cpu */
-			prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg);
+			prom_printf("starting cpu hw idx %x... ", reg);
 			call_prom("start-cpu", 3, 0, node,
 				  secondary_hold, reg);
 
@@ -1431,17 +1405,10 @@ static void __init prom_hold_cpus(void)
 		}
 #ifdef CONFIG_SMP
 		else
-			prom_printf("%x : boot cpu     %x\n", cpuid, reg);
+			prom_printf("boot cpu hw idx %x\n", reg);
 #endif /* CONFIG_SMP */
-
-		/* Reserve cpu #s for secondary threads.   They start later. */
-		cpuid += cpu_threads;
 	}
 
-	if (cpuid > NR_CPUS)
-		prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS)
-			    ") exceeded: ignoring extras\n");
-
 	prom_debug("prom_hold_cpus: end...\n");
 }
 

arch/powerpc/kernel/ptrace.c

@@ -22,6 +22,7 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/elf.h>
 #include <linux/user.h>
 #include <linux/security.h>
@@ -717,7 +718,7 @@ void user_disable_single_step(struct task_struct *task)
 	struct pt_regs *regs = task->thread.regs;
 
 
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 	/* If DAC then do not single step, skip */
 	if (task->thread.dabr)
 		return;
@@ -744,10 +745,11 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	if (addr > 0)
 		return -EINVAL;
 
+	/* The bottom 3 bits in dabr are flags */
 	if ((data & ~0x7UL) >= TASK_SIZE)
 		return -EIO;
 
-#ifdef CONFIG_PPC64
+#ifndef CONFIG_BOOKE
 
 	/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
 	 *  It was assumed, on previous implementations, that 3 bits were
@@ -769,7 +771,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	task->thread.dabr = data;
 
 #endif
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 
 	/* As described above, it was assumed 3 bits were passed with the data
 	 *  address, but we will assume only the mode bits will be passed
@@ -1013,31 +1015,24 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-static void do_syscall_trace(void)
+/*
+ * We must return the syscall number to actually look up in the table.
+ * This can be -1L to skip running any syscall at all.
+ */
+long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
+	long ret = 0;
 
-void do_syscall_trace_enter(struct pt_regs *regs)
-{
 	secure_computing(regs->gpr[0]);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE)
-	    && (current->ptrace & PT_PTRACED))
-		do_syscall_trace();
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->gpr[0].
+		 */
+		ret = -1L;
 
 	if (unlikely(current->audit_context)) {
 #ifdef CONFIG_PPC64
@@ -1055,16 +1050,19 @@ void do_syscall_trace_enter(struct pt_regs *regs)
 					    regs->gpr[5] & 0xffffffff,
 					    regs->gpr[6] & 0xffffffff);
 	}
+
+	return ret ?: regs->gpr[0];
 }
 
 void do_syscall_trace_leave(struct pt_regs *regs)
 {
+	int step;
+
 	if (unlikely(current->audit_context))
 		audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
 				   regs->result);
 
-	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-	     || test_thread_flag(TIF_SINGLESTEP))
-	    && (current->ptrace & PT_PTRACED))
-		do_syscall_trace();
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }

arch/powerpc/kernel/setup-common.c

@@ -367,7 +367,6 @@ static void __init cpu_init_thread_core_maps(int tpc)
  * setup_cpu_maps - initialize the following cpu maps:
  *                  cpu_possible_map
  *                  cpu_present_map
- *                  cpu_sibling_map
  *
  * Having the possible map set up early allows us to restrict allocations
  * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
@@ -475,29 +474,6 @@ void __init smp_setup_cpu_maps(void)
 	 */
 	cpu_init_thread_core_maps(nthreads);
 }
-
-/*
- * Being that cpu_sibling_map is now a per_cpu array, then it cannot
- * be initialized until the per_cpu areas have been created.  This
- * function is now called from setup_per_cpu_areas().
- */
-void __init smp_setup_cpu_sibling_map(void)
-{
-#ifdef CONFIG_PPC64
-	int i, cpu, base;
-
-	for_each_possible_cpu(cpu) {
-		DBG("Sibling map for CPU %d:", cpu);
-		base = cpu_first_thread_in_core(cpu);
-		for (i = 0; i < threads_per_core; i++) {
-			cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
-			DBG(" %d", base + i);
-		}
-		DBG("\n");
-	}
-
-#endif /* CONFIG_PPC64 */
-}
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_PCSPKR_PLATFORM

arch/powerpc/kernel/setup_64.c

@@ -611,9 +611,6 @@ void __init setup_per_cpu_areas(void)
 		paca[i].data_offset = ptr - __per_cpu_start;
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
 	}
-
-	/* Now that per_cpu is setup, initialize cpu_sibling_map */
-	smp_setup_cpu_sibling_map();
 }
 #endif
 

arch/powerpc/kernel/signal.c

@@ -9,7 +9,7 @@
  * this archive for more details.
  */
 
-#include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/signal.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -112,7 +112,7 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
 	}
 }
 
-int do_signal(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 {
 	siginfo_t info;
 	int signr;
@@ -147,7 +147,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	 */
 	if (current->thread.dabr) {
 		set_dabr(current->thread.dabr);
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 		mtspr(SPRN_DBCR0, current->thread.dbcr0);
 #endif
 	}
@@ -177,11 +177,28 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 		 * its frame, and we can clear the TLF_RESTORE_SIGMASK flag.
 		 */
 		current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK;
+
+		/*
+		 * Let tracing know that we've done the handler setup.
+		 */
+		tracehook_signal_handler(signr, &info, &ka, regs,
+					 test_thread_flag(TIF_SINGLESTEP));
 	}
 
 	return ret;
 }
 
+void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+{
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal_pending(NULL, regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
+
 long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		unsigned long r5, unsigned long r6, unsigned long r7,
 		unsigned long r8, struct pt_regs *regs)

arch/powerpc/kernel/smp.c

@@ -41,6 +41,7 @@
 #include <asm/smp.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
+#include <asm/cputhreads.h>
 #include <asm/cputable.h>
 #include <asm/system.h>
 #include <asm/mpic.h>
@@ -62,10 +63,12 @@ struct thread_info *secondary_ti;
 cpumask_t cpu_possible_map = CPU_MASK_NONE;
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
+DEFINE_PER_CPU(cpumask_t, cpu_core_map) = CPU_MASK_NONE;
 
 EXPORT_SYMBOL(cpu_online_map);
 EXPORT_SYMBOL(cpu_possible_map);
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
+EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 
 /* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
@@ -228,6 +231,8 @@ void __devinit smp_prepare_boot_cpu(void)
 	BUG_ON(smp_processor_id() != boot_cpuid);
 
 	cpu_set(boot_cpuid, cpu_online_map);
+	cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
+	cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
 #ifdef CONFIG_PPC64
 	paca[boot_cpuid].__current = current;
 #endif
@@ -375,11 +380,60 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	return 0;
 }
 
+/* Return the value of the reg property corresponding to the given
+ * logical cpu.
+ */
+int cpu_to_core_id(int cpu)
+{
+	struct device_node *np;
+	const int *reg;
+	int id = -1;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (!np)
+		goto out;
+
+	reg = of_get_property(np, "reg", NULL);
+	if (!reg)
+		goto out;
+
+	id = *reg;
+out:
+	of_node_put(np);
+	return id;
+}
+
+/* Must be called when no change can occur to cpu_present_map,
+ * i.e. during cpu online or offline.
+ */
+static struct device_node *cpu_to_l2cache(int cpu)
+{
+	struct device_node *np;
+	const phandle *php;
+	phandle ph;
+
+	if (!cpu_present(cpu))
+		return NULL;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (np == NULL)
+		return NULL;
+
+	php = of_get_property(np, "l2-cache", NULL);
+	if (php == NULL)
+		return NULL;
+	ph = *php;
+	of_node_put(np);
+
+	return of_find_node_by_phandle(ph);
+}
 
 /* Activate a secondary processor. */
 int __devinit start_secondary(void *unused)
 {
 	unsigned int cpu = smp_processor_id();
+	struct device_node *l2_cache;
+	int i, base;
 
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
@@ -400,6 +454,33 @@ int __devinit start_secondary(void *unused)
 
 	ipi_call_lock();
 	cpu_set(cpu, cpu_online_map);
+	/* Update sibling maps */
+	base = cpu_first_thread_in_core(cpu);
+	for (i = 0; i < threads_per_core; i++) {
+		if (cpu_is_offline(base + i))
+			continue;
+		cpu_set(cpu, per_cpu(cpu_sibling_map, base + i));
+		cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
+
+		/* cpu_core_map should be a superset of
+		 * cpu_sibling_map even if we don't have cache
+		 * information, so update the former here, too.
+		 */
+		cpu_set(cpu, per_cpu(cpu_core_map, base +i));
+		cpu_set(base + i, per_cpu(cpu_core_map, cpu));
+	}
+	l2_cache = cpu_to_l2cache(cpu);
+	for_each_online_cpu(i) {
+		struct device_node *np = cpu_to_l2cache(i);
+		if (!np)
+			continue;
+		if (np == l2_cache) {
+			cpu_set(cpu, per_cpu(cpu_core_map, i));
+			cpu_set(i, per_cpu(cpu_core_map, cpu));
+		}
+		of_node_put(np);
+	}
+	of_node_put(l2_cache);
 	ipi_call_unlock();
 
 	local_irq_enable();
@@ -437,10 +518,42 @@ void __init smp_cpus_done(unsigned int max_cpus)
 #ifdef CONFIG_HOTPLUG_CPU
 int __cpu_disable(void)
 {
-	if (smp_ops->cpu_disable)
-		return smp_ops->cpu_disable();
+	struct device_node *l2_cache;
+	int cpu = smp_processor_id();
+	int base, i;
+	int err;
 
-	return -ENOSYS;
+	if (!smp_ops->cpu_disable)
+		return -ENOSYS;
+
+	err = smp_ops->cpu_disable();
+	if (err)
+		return err;
+
+	/* Update sibling maps */
+	base = cpu_first_thread_in_core(cpu);
+	for (i = 0; i < threads_per_core; i++) {
+		cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i));
+		cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu));
+		cpu_clear(cpu, per_cpu(cpu_core_map, base +i));
+		cpu_clear(base + i, per_cpu(cpu_core_map, cpu));
+	}
+
+	l2_cache = cpu_to_l2cache(cpu);
+	for_each_present_cpu(i) {
+		struct device_node *np = cpu_to_l2cache(i);
+		if (!np)
+			continue;
+		if (np == l2_cache) {
+			cpu_clear(cpu, per_cpu(cpu_core_map, i));
+			cpu_clear(i, per_cpu(cpu_core_map, cpu));
+		}
+		of_node_put(np);
+	}
+	of_node_put(l2_cache);
+
+
+	return 0;
 }
 
 void __cpu_die(unsigned int cpu)

arch/powerpc/kernel/stacktrace.c

@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
-#include <linux/module.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>