"...android_kernel_samsung_matisse.git" did not exist on "39da9847113a870b20fee9a7c216a848b9a5e9f7"
Commit 6e15cf04 authored by Ingo Molnar's avatar Ingo Molnar
Browse files

Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2


Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
parents be0ea696 60db5642
......@@ -18,11 +18,11 @@ For an architecture to support this feature, it must define some of
these macros in include/asm-XXX/topology.h:
#define topology_physical_package_id(cpu)
#define topology_core_id(cpu)
#define topology_thread_siblings(cpu)
#define topology_core_siblings(cpu)
#define topology_thread_cpumask(cpu)
#define topology_core_cpumask(cpu)
The type of **_id is int.
The type of siblings is cpumask_t.
The type of siblings is (const) struct cpumask *.
To be consistent on all architectures, include/linux/topology.h
provides default definitions for any of the above macros that are
......
......@@ -1325,8 +1325,13 @@ and is between 256 and 4096 characters. It is defined in the file
memtest= [KNL,X86] Enable memtest
Format: <integer>
range: 0,4 : pattern number
default : 0 <disable>
Specifies the number of memtest passes to be
performed. Each pass selects another test
pattern from a given set of patterns. Memtest
fills the memory with this pattern, validates
memory contents and reserves bad memory
regions that are detected.
meye.*= [HW] Set MotionEye Camera parameters
See Documentation/video4linux/meye.txt.
......
......@@ -158,7 +158,7 @@ Offset Proto Name Meaning
0202/4 2.00+ header Magic signature "HdrS"
0206/2 2.00+ version Boot protocol version supported
0208/4 2.00+ realmode_swtch Boot loader hook (see below)
020C/2 2.00+ start_sys The load-low segment (0x1000) (obsolete)
020C/2 2.00+ start_sys_seg The load-low segment (0x1000) (obsolete)
020E/2 2.00+ kernel_version Pointer to kernel version string
0210/1 2.00+ type_of_loader Boot loader identifier
0211/1 2.00+ loadflags Boot protocol option flags
......@@ -170,10 +170,11 @@ Offset Proto Name Meaning
0224/2 2.01+ heap_end_ptr Free memory after setup end
0226/2 N/A pad1 Unused
0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line
022C/4 2.03+ initrd_addr_max Highest legal initrd address
022C/4 2.03+ ramdisk_max Highest legal initrd address
0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel
0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not
0235/3 N/A pad2 Unused
0235/1 N/A pad2 Unused
0236/2 N/A pad3 Unused
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
023C/4 2.07+ hardware_subarch Hardware subarchitecture
0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data
......@@ -299,14 +300,14 @@ Protocol: 2.00+
e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
10.17.
Field name: readmode_swtch
Field name: realmode_swtch
Type: modify (optional)
Offset/size: 0x208/4
Protocol: 2.00+
Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
Field name: start_sys
Field name: start_sys_seg
Type: read
Offset/size: 0x20c/2
Protocol: 2.00+
......@@ -468,7 +469,7 @@ Protocol: 2.02+
zero, the kernel will assume that your boot loader does not support
the 2.02+ protocol.
Field name: initrd_addr_max
Field name: ramdisk_max
Type: read
Offset/size: 0x22c/4
Protocol: 2.03+
......@@ -542,7 +543,10 @@ Protocol: 2.08+
The payload may be compressed. The format of both the compressed and
uncompressed data should be determined using the standard magic
numbers. Currently only gzip compressed ELF is used.
numbers. The currently supported compression formats are gzip
(magic numbers 1F 8B or 1F 9E), bzip2 (magic number 42 5A) and LZMA
(magic number 5D 00). The uncompressed payload is currently always ELF
(magic number 7F 45 4C 46).
Field name: payload_length
Type: read
......
......@@ -533,8 +533,9 @@ KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
endif
# Force gcc to behave correct even for buggy distributions
# Arch Makefiles may override this setting
ifndef CONFIG_CC_STACKPROTECTOR
KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
endif
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
......
......@@ -55,7 +55,7 @@ int irq_select_affinity(unsigned int irq)
cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
last_cpu = cpu;
irq_desc[irq].affinity = cpumask_of_cpu(cpu);
cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
irq_desc[irq].chip->set_affinity(irq, cpumask_of(cpu));
return 0;
}
......
......@@ -189,9 +189,21 @@ callback_init(void * kernel_end)
if (alpha_using_srm) {
static struct vm_struct console_remap_vm;
unsigned long vaddr = VMALLOC_START;
unsigned long nr_pages = 0;
unsigned long vaddr;
unsigned long i, j;
/* calculate needed size */
for (i = 0; i < crb->map_entries; ++i)
nr_pages += crb->map[i].count;
/* register the vm area */
console_remap_vm.flags = VM_ALLOC;
console_remap_vm.size = nr_pages << PAGE_SHIFT;
vm_area_register_early(&console_remap_vm, PAGE_SIZE);
vaddr = (unsigned long)console_remap_vm.addr;
/* Set up the third level PTEs and update the virtual
addresses of the CRB entries. */
for (i = 0; i < crb->map_entries; ++i) {
......@@ -213,12 +225,6 @@ callback_init(void * kernel_end)
vaddr += PAGE_SIZE;
}
}
/* Let vmalloc know that we've allocated some space. */
console_remap_vm.flags = VM_ALLOC;
console_remap_vm.addr = (void *) VMALLOC_START;
console_remap_vm.size = vaddr - VMALLOC_START;
vmlist = &console_remap_vm;
}
callback_init_done = 1;
......
......@@ -104,6 +104,11 @@ static struct irq_desc bad_irq_desc = {
.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
};
#ifdef CONFIG_CPUMASK_OFFSTACK
/* We are not allocating bad_irq_desc.affinity or .pending_mask */
#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
#endif
/*
* do_IRQ handles all hardware IRQ's. Decoded IRQs should not
* come via this function. Instead, they should provide their
......@@ -161,7 +166,7 @@ void __init init_IRQ(void)
irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
#ifdef CONFIG_SMP
bad_irq_desc.affinity = CPU_MASK_ALL;
cpumask_setall(bad_irq_desc.affinity);
bad_irq_desc.cpu = smp_processor_id();
#endif
init_arch_irq();
......@@ -191,15 +196,16 @@ void migrate_irqs(void)
struct irq_desc *desc = irq_desc + i;
if (desc->cpu == cpu) {
unsigned int newcpu = any_online_cpu(desc->affinity);
if (newcpu == NR_CPUS) {
unsigned int newcpu = cpumask_any_and(desc->affinity,
cpu_online_mask);
if (newcpu >= nr_cpu_ids) {
if (printk_ratelimit())
printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n",
i, cpu);
cpus_setall(desc->affinity);
newcpu = any_online_cpu(desc->affinity);
cpumask_setall(desc->affinity);
newcpu = cpumask_any_and(desc->affinity,
cpu_online_mask);
}
route_irq(desc, i, newcpu);
......
......@@ -64,7 +64,9 @@ SECTIONS
__initramfs_end = .;
#endif
. = ALIGN(4096);
__per_cpu_load = .;
__per_cpu_start = .;
*(.data.percpu.page_aligned)
*(.data.percpu)
*(.data.percpu.shared_aligned)
__per_cpu_end = .;
......
......@@ -263,7 +263,7 @@ static void em_route_irq(int irq, unsigned int cpu)
const struct cpumask *mask = cpumask_of(cpu);
spin_lock_irq(&desc->lock);
desc->affinity = *mask;
cpumask_copy(desc->affinity, mask);
desc->chip->set_affinity(irq, mask);
spin_unlock_irq(&desc->lock);
}
......
......@@ -181,7 +181,7 @@ source "kernel/Kconfig.preempt"
config QUICKLIST
def_bool y
config HAVE_ARCH_BOOTMEM_NODE
config HAVE_ARCH_BOOTMEM
def_bool n
config ARCH_HAVE_MEMORY_PRESENT
......
......@@ -3,14 +3,4 @@
#include <asm-generic/percpu.h>
#ifdef CONFIG_MODULES
#define PERCPU_MODULE_RESERVE 8192
#else
#define PERCPU_MODULE_RESERVE 0
#endif
#define PERCPU_ENOUGH_ROOM \
(ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) + \
PERCPU_MODULE_RESERVE)
#endif /* __ARCH_BLACKFIN_PERCPU__ */
......@@ -70,6 +70,11 @@ static struct irq_desc bad_irq_desc = {
#endif
};
#ifdef CONFIG_CPUMASK_OFFSTACK
/* We are not allocating a variable-sized bad_irq_desc.affinity */
#error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK."
#endif
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
......
......@@ -27,12 +27,12 @@ extern void *per_cpu_init(void);
#else /* ! SMP */
#define PER_CPU_ATTRIBUTES __attribute__((__section__(".data.percpu")))
#define per_cpu_init() (__phys_per_cpu_start)
#endif /* SMP */
#define PER_CPU_BASE_SECTION ".data.percpu"
/*
* Be extremely careful when taking the address of this variable! Due to virtual
* remapping, it is different from the canonical address returned by __get_cpu_var(var)!
......
......@@ -84,7 +84,7 @@ void build_cpu_to_node_map(void);
.child = NULL, \
.groups = NULL, \
.min_interval = 8, \
.max_interval = 8*(min(num_online_cpus(), 32)), \
.max_interval = 8*(min(num_online_cpus(), 32U)), \
.busy_factor = 64, \
.imbalance_pct = 125, \
.cache_nice_tries = 2, \
......
#ifndef _ASM_IA64_UV_UV_H
#define _ASM_IA64_UV_UV_H
#include <asm/system.h>
#include <asm/sn/simulator.h>
static inline int is_uv_system(void)
{
/* temporary support for running on hardware simulator */
return IS_MEDUSA() || ia64_platform_is("uv");
}
#endif /* _ASM_IA64_UV_UV_H */
......@@ -199,6 +199,10 @@ char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
return __va(phys_addr);
}
void __init __acpi_unmap_table(char *map, unsigned long size)
{
}
/* --------------------------------------------------------------------------
Boot-time Table Parsing
-------------------------------------------------------------------------- */
......
......@@ -880,7 +880,7 @@ iosapic_unregister_intr (unsigned int gsi)
if (iosapic_intr_info[irq].count == 0) {
#ifdef CONFIG_SMP
/* Clear affinity */
cpus_setall(idesc->affinity);
cpumask_setall(idesc->affinity);
#endif
/* Clear the interrupt information */
iosapic_intr_info[irq].dest = 0;
......
......@@ -103,7 +103,7 @@ static char irq_redir [NR_IRQS]; // = { [0 ... NR_IRQS-1] = 1 };
void set_irq_affinity_info (unsigned int irq, int hwid, int redir)
{
if (irq < NR_IRQS) {
cpumask_copy(&irq_desc[irq].affinity,
cpumask_copy(irq_desc[irq].affinity,
cpumask_of(cpu_logical_id(hwid)));
irq_redir[irq] = (char) (redir & 0xff);
}
......@@ -148,7 +148,7 @@ static void migrate_irqs(void)
if (desc->status == IRQ_PER_CPU)
continue;
if (cpumask_any_and(&irq_desc[irq].affinity, cpu_online_mask)
if (cpumask_any_and(irq_desc[irq].affinity, cpu_online_mask)
>= nr_cpu_ids) {
/*
* Save it for phase 2 processing
......
......@@ -493,11 +493,13 @@ ia64_handle_irq (ia64_vector vector, struct pt_regs *regs)
saved_tpr = ia64_getreg(_IA64_REG_CR_TPR);
ia64_srlz_d();
while (vector != IA64_SPURIOUS_INT_VECTOR) {
struct irq_desc *desc = irq_to_desc(vector);
if (unlikely(IS_LOCAL_TLB_FLUSH(vector))) {
smp_local_flush_tlb();
kstat_this_cpu.irqs[vector]++;
kstat_incr_irqs_this_cpu(vector, desc);
} else if (unlikely(IS_RESCHEDULE(vector)))
kstat_this_cpu.irqs[vector]++;
kstat_incr_irqs_this_cpu(vector, desc);
else {
int irq = local_vector_to_irq(vector);
......@@ -551,11 +553,13 @@ void ia64_process_pending_intr(void)
* Perform normal interrupt style processing
*/
while (vector != IA64_SPURIOUS_INT_VECTOR) {
struct irq_desc *desc = irq_to_desc(vector);
if (unlikely(IS_LOCAL_TLB_FLUSH(vector))) {
smp_local_flush_tlb();
kstat_this_cpu.irqs[vector]++;
kstat_incr_irqs_this_cpu(vector, desc);
} else if (unlikely(IS_RESCHEDULE(vector)))
kstat_this_cpu.irqs[vector]++;
kstat_incr_irqs_this_cpu(vector, desc);
else {
struct pt_regs *old_regs = set_irq_regs(NULL);
int irq = local_vector_to_irq(vector);
......
......@@ -38,7 +38,7 @@ static void ia64_set_msi_irq_affinity(unsigned int irq,
msg.data = data;
write_msi_msg(irq, &msg);
irq_desc[irq].affinity = cpumask_of_cpu(cpu);
cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
}
#endif /* CONFIG_SMP */
......@@ -150,7 +150,7 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
msg.address_lo |= MSI_ADDR_DEST_ID_CPU(cpu_physical_id(cpu));
dmar_msi_write(irq, &msg);
irq_desc[irq].affinity = *mask;
cpumask_copy(irq_desc[irq].affinity, mask);
}
#endif /* CONFIG_SMP */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment